| Supply Voltage | VCC | | 4.5 | 5.0 | 5.5 | V |
| Supply Current | ICC | No load on VOUT | | 10 | 15 | mA |
| Internal Bandwidth | BWi | Small signal 3 dB, CL = 1 nF, TA = 25C | | 120 | | kHz |
| Operating Ambient Temperature | TA | | 40 | | 150 | C |
| Sensitivity Range | SensPR | SENS_COARSE = 00, TA = 25C | 0.6 | | 1.3 | mV/G |
| Sensitivity Range | SensPR | SENS_COARSE = 01, TA = 25C | 1.3 | | 2.9 | mV/G |
| Sensitivity Range | SensPR | SENS_COARSE = 10, TA = 25C | 2.9 | | 6.4 | mV/G |
| Sensitivity Range | SensPR | SENS_COARSE = 11, TA = 25C | 6.4 | | 14 | mV/G |
| Output Voltage Clamp (High) | VCLP(HIGH) | TA = 25C, RL(PULLDWN) = 10 k to GND | 4.55 | | 4.85 | V |
| Output Voltage Clamp (Low) | VCLP(LOW) | TA = 25C, RL(PULLUP) = 10 k to VCC | 0.15 | | 0.45 | V |
| Noise (RMS) | VN | TA = 25C, CL = 1 nF, BWf = BWi | | 1.1 | | mGRMS/(Hz) |
| Noise (Peak-to-Peak) | VN | TA = 25C, CL = 1 nF, Sens = 2 mV/G, BWf = BWi | | 6.3 | | mVp-p |
| Quiescent Voltage Output Programming Range | VOUT(Q)PR | TA = 25C | 2.3 | | 2.7 | V |
| Sensitivity Temperature Coefficient | TCSENS | TA=150C, TA= 40C, calculated relative to 25C | | 0 | | %/C |
| Sensitivity Drift Through Temperature Range | SensTC | TA = 25C to 150C | 2.5 | | 2.5 | % |
| Quiescent Voltage Output Temperature Coefficient | TCQVO | TA = 150C, TA = 40C, calculated relative to 25C | | 0 | | mV/C |
| Quiescent Voltage Output Drift Through Temperature Range | VOUT(Q)TC | TA = 25C to 150C | 15 | | 15 | mV |
| Linearity Sensitivity Error | LinERR | | < 0.25 | | 1 | % |
| Symmetry Sensitivity Error | SymERR | | < 0.25 | | 1 | % |
| Ratiometry Quiescent Voltage Output Error | RatERRVOUT(Q) | Through supply voltage range (relative to VCC = 5 V) | 1 | 0 | 1 | % |
| Ratiometry Sensitivity Error | RatERRSens | Through supply voltage range (relative to VCC = 5 V) | 1.5 | < 0.5 | 1.5 | % |
| Package Thermal Resistance | RJA | On 1-layer PCB with exposed copper limited to solder pads | | 174 | | C/W |
