Home > Accelerometers >

Low frequency accelerometer Amphenol HV202LF with PZT shear sensing element and stainless steel case

Product Categories

Analog and Digital Output [295]
Pressure Sensors, Transducers [382]
Sensor, Transducer Amplifiers [7]
Specialized Sensors [33]
Thermostats - Solid State [7]
Accelerometers [156]
Float, Level Sensors [42]
Force Sensors, Load Cells [6]
Humidity, Moisture Sensors [120]
Particle, Dust Sensors [9]
Photoresistors [39]
Angle, Linear Position Measuring [417]
Sensor, Transducer Accessories [5]
NTC Thermistors [809]
Ultrasonic Receivers, Transmitters [44]
Current Sensors [469]
Ambient Light, IR, UV Sensors [139]
Proximity Sensors [56]
Encoders [6]
Strain Gauges [5]
Multifunction [55]
Flow Switch [12]
Pressure Transmitters [1]
Gas Sensor [309]
PTC Thermistors [44]
Particulate Matter (PM) Transmitters [13]
IrDA Transceiver Modules [6]
Distance Measuring [11]
Photo Detectors - Remote Receiver [60]
Sensor Cable Accessories [1]
Linear, Compass (ICs) [289]
Position, Proximity, Speed (Modules) [72]
Multi Purpose Magnets [2]
Optical Motion Sensors [70]
Thermostats - Mechanical [48]
Gyroscopes [5]
Camera Modules [8]
IMUs (Inertial Measurement Units) [18]
Photo Detectors - Logic Output [4]
Switches (Solid State) [703]
Photointerrupters - Slot Type - Logic Output [26]
Photodiodes [103]
Image Sensors, Camera [18]
Inclinometers (ICs) [6]
Vibration Sensors [77]
RTD (Resistance Temperature Detector) [83]
Photointerrupters - Slot Type - Transistor Output [71]
Phototransistors [67]
Reflective - Analog Output [67]
Reflective - Logic Output [14]
Thermocouples, Temperature Probes [32]

Changsha Purple Horn E-Commerce Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Low frequency accelerometer Amphenol HV202LF with PZT shear sensing element and stainless steel case

Standby Current : -

Description : Accelerometers RoHS

Mfr. Part # : HV202LF

Model Number : HV202LF

Contact Now

Product Overview

The Wilcoxon HV100LF and HV200LF series are low-frequency accelerometers designed for applications requiring high electrical isolation and improved EMI resistance. These sensors are ideal for power generation, wind turbines, railway systems, and other high-voltage environments. They offer ultra low-frequency measurements down to 0.1 Hz, rapid shock recovery, and can withstand arcing between the sensor base and internal electronics up to 6,000 volts. Improvements in EFT and ESD resistance enhance survivability during extreme transient events.

Product Attributes

Brand: Wilcoxon Sensing Technologies
Company: An Amphenol Company
Certifications: Manufactured in an approved ISO 9001 facility
Sensing Element Design: PZT, shear
Sensor Case Material: Stainless steel
Isolation Material: Ceramic
Sealing: Hermetic
Grounding: Case isolated, internally shielded
Recommended Cabling: J10 / J9T2A

Technical Specifications

General Specifications:

Specification	LF Series (100 mV/g)	LF-500 Series (500 mV/g)
Sensitivity, 5%, 25C	100 mV/g	500 mV/g
Acceleration range, VDC > 22 V	80 g peak	10 g peak
Amplitude nonlinearity	1%
Frequency response: 5%	0.35 - 5,000 Hz
Frequency response: 10%	0.25 - 7,000 Hz
Frequency response: 3 dB	0.1 - 11,000 Hz
Resonance frequency, nominal	28 kHz
Transverse sensitivity, max	5% of axial
Temperature response: 25C to +120C	10%	+15%
Temperature range	50 to +120 C
Power requirement: Voltage source	18 - 30 VDC
Power requirement: Current regulating diode	2 - 10 mA
Dielectric withstand voltage (connector to surface): 6,000 VDC (1 min.)
Dielectric withstand voltage (connector to surface): 5,000 VAC (1 min.)
Electrical noise, equiv. g (Broadband 2.5 Hz to 25 kHz)	400 g rms	250 g rms
Electrical noise, equiv. g (Spectral @ 10 Hz)	10 g/Hz	3 g/Hz
Electrical noise, equiv. g (Spectral @ 100 Hz)	5 g/Hz	2 g/Hz
Electrical noise, equiv. g (Spectral @ 1,000 Hz)	5 g/Hz	2 g/Hz
Output impedance, max	100	300
Impedance (between connector and base): DC	>100 G
Impedance (between connector and base): 100 Hz	>100 M
Impedance (between connector and base): 1.0 kHz	>10 M
Impedance (between connector and base): 10 kHz	>1 M
Bias output voltage	13 VDC
Vibration limit	500 g peak
Shock limit	5,000 g peak
Electromagnetic sensitivity, equiv. g, max	70 g/gauss
Base strain sensitivity, max	0.0002 g/strain

HV100LF Series Models:

Model	Output Connector	Integral Mounting	Dimensions (A x B x C)	Weight
HV100LF / HV100LF-500	4 pin M12	M8 x 1.25	1.98 in. (50.3 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm)	126 grams (4.44 oz)
HV101LF / HV101LF-500	4 pin M12	1/4-28 UNF	1.98 in. (50.3 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm)	126 grams (4.44 oz)
HV102LF / HV102LF-500	4 pin M12	M6 x 1.00	1.98 in. (50.3 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm)	126 grams (4.44 oz)

Note: For HV100LF series, connector shell should be tied to cable shield. Recommended connector: R75S.

HV200LF Series Models:

Model	Output Connector	Integral Mounting	Dimensions (A x B x C)	Weight
HV200LF / HV200LF-500	2 pin MIL-5015	1/4-28 UNF	2.21 in. (56.0 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm)	122 grams (4.35 oz)
HV201LF / HV201LF-500	2 pin MIL-5015	M8 x 1.25	2.21 in. (56.0 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm)	122 grams (4.35 oz)
HV202LF / HV202LF-500	2 pin MIL-5015	M6 x 1.00	2.21 in. (56.0 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm)	122 grams (4.35 oz)

Note: For HV200LF series, connector shell should be tied to cable shield. Recommended connector: R6Q.

Connections - HV100LF series:

Connector Pin	Signal
P1	to pin 3 inner shield
P2	common
P3	case
P4	connector shell case

Connections - HV200LF series:

Connector Pin	Signal
A	common
B	connector shell case

2504101957_Amphenol-HV202LF_C1019406.pdf

Quality Low frequency accelerometer Amphenol HV202LF with PZT shear sensing element and stainless steel case for sale

Low frequency accelerometer Amphenol HV202LF with PZT shear sensing element and stainless steel case Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Changsha Purple Horn E-Commerce Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!